OpenRail Overhead Line Designer Help

Cut Feeder Line

Ribbon: Track-side Design > Feeder

Cut

You can cut a feeder in two separate feeder lines. The characteristics of the origin feeder will be kept.

Intention

Cut a feeder into two discrete feeders.

Instructions
  1. Run the Cut Feeder function.
  2. Select the feeders which you want to isolate.
  3. Insert the position where the feeder should be cut.
  4. Run the Cut function.

Result

Sicat Master will cut the feeder in two parts. Two separate feeders will be created with the same properties.

Parent topic: Feeder